Home › Engine / Hybrid System › 2TR-FE STARTING › STARTER
RM2850E _51 Engine / Hybrid System _073293 2TR-FE STARTING _0357009 STARTER A

2TR-FE STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.
A161052E03
0.719,1.833 0.927,2.01 0.208,0.177 10 false (a) 3.104,1.323 3.313,1.5 0.208,0.177 10 false (b) 1.969,0.438 2.271,0.656 0.302,0.219 10 true (b)

Remove the nut, then disconnect the lead wire from terminal C.


b.

Remove the 2 through bolts, then pull the starter yoke and starter armature to remove them.


c.

Remove the O-ring from the starter yoke.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A161053

Remove the 2 screws, then remove the magnet starter switch.


b.
A161054E06
2.063,1.719 2.063,1.531 false 0.594,1.552 0.719,1.708 false 0.375,0.844 0.375,0.688 false 0.76,0.708 0.76,0.583 false 1.354,1.063 1.354,0.938 false 2,1.74 2.198,1.917 0.198,0.177 10 false (b) 0.375,1.396 0.573,1.573 0.198,0.177 10 false (c) 1.281,1.083 1.469,1.25 0.188,0.167 10 false (d) 0.688,0.375 0.885,0.552 0.198,0.177 10 false (e) 0.313,0.49 0.469,0.667 0.156,0.177 10 false (f)

Remove the starter clutch from the starter drive housing.


c.

Remove the magnet switch return spring from the starter clutch.


d.

Remove the starter idle pinion from the starter drive housing.


e.

Remove the retainer from the starter drive housing.


f.

Remove the clutch roller from the retainer.


g.
A102677

Using a magnetic finger, remove the steel ball from the starter clutch.


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A161131

Remove the 2 screws, then remove the commutator end frame from the starter yoke.


b.

Remove the dust protector from the commutator end frame.


c.

Remove the O-ring from the starter yoke.


d.
A062429

Using a screwdriver, hold the spring back and disconnect the 4 brushes from the brush holder.


e.

Remove the brush holder from the starter armature.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.

Remove the starter armature from the starter yoke.