1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
67675
2.REMOVE FRONT SIDE TRIM BOARD COVER RH
Remove the screw.
Detach the 4 claws and 3 clips to remove the front side trim board cover RH.
89661
3.REMOVE ECM
Disconnect the 4 connectors.
Remove the 2 bolts, nut and the ECM.
89667E
4.REMOVE NO. 1 ECM BRACKET
Remove the 2 screws and the No. 1 ECM bracket.
89668
5.REMOVE NO. 2 ECM BRACKET
Remove the 2 screws and the No. 1 ECM bracket.