Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › ECM › from 2018.07
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356939 ECM A

2TR-FE ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89668 1.INSTALL NO. 2 ECM BRACKET

a.

Install the No. 2 ECM bracket with the 2 screws.

Torque:

3.0 N*m (31 kgf*cm , 27 in.*lbf)



Hide 89667E 2.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket with the 2 screws.

Torque:

3.0 N*m (31 kgf*cm , 27 in.*lbf)



Hide 89661 3.INSTALL ECM

a.

Install the ECM with the 2 bolts and nut.

Torque:

5.5 N*m (56 kgf*cm, 49 in.*lbf)



b.

Connect the 4 connectors.


Hide 67675 4.INSTALL FRONT SIDE TRIM BOARD COVER RH

a.

Attach the 4 claws and 3 clips to install the front side trim board cover RH.


b.

Install the screw.


Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL