Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356940 ACCELERATOR PEDAL G

2TR-FE ENGINE CONTROL  ACCELERATOR PEDAL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 78100 1.INSPECT ACCELERATOR PEDAL ASSEMBLY

a.
A146740E02
0.646,1.542 1.104,1.563 false 2.667,1.448 2.74,1.615 false 2.208,1.646 3.271,1.844 1.063,0.198 10 false Intelligent Tester 1.156,1.49 1.542,1.688 0.385,0.198 10 false DLC3

Connect an intelligent tester to the DLC3.


b.

Turn the ignition switch ON and turn the tester on.


c.

Select the following menu items: Powertrain / Engine and ECT / Data List / Accel Position 1 and Accel Position 2.


d.

While the accelerator pedal is depressed and released, check that the values of Accel Position 1 and Accel Position 2 are within the specifications.

Accelerator Pedal Position No. 1 Standard voltage:
Condition Specified Condition
Accelerator pedal released 0.4 to 1.4 V
Accelerator pedal depressed 3.0 to 4.6 V


Accelerator Pedal Position No. 2 Standard voltage:
Condition Specified Condition
Accelerator pedal released 0.9 to 2.3 V
Accelerator pedal depressed 3.0 to 4.6 V


HINT:

If the results are not as specified, check the accelerator pedal, wire harness and ECM.