Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356940 ACCELERATOR PEDAL A

2TR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 78100 2.REMOVE ACCELERATOR PEDAL ASSEMBLY

a.
A430854

Disconnect the accelerator pedal connector.


b.

Remove the 2 bolts and accelerator pedal assembly.

NOTICE:
·

This accelerator pedal assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.

·

Do not drop or strike the accelerator pedal.

·

Do not disassemble the accelerator pedal.