Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › CRANKSAFT POSITION SENSOR
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356943 CRANKSAFT POSITION SENSOR G

2TR-FE ENGINE CONTROL  CRANKSAFT POSITION SENSOR  INSPECTION  


PROCEDURE

Hide 11301K 1.INSPECT CRANKSHAFT POSITION SENSOR

a.

Check the resistance.

i.
A074841

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance:
Tester Connection Specified Condition
1 (NE+) - 2 (NE-) 1,850 to 2,450 Ω at 20°C (68°F)


If the result is not as specified, replace the crankshaft position sensor.