Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356944 ENGINE COOLANT TEMPERATURE SENSOR G

2TR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 83420 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR

a.

Check the resistance.

i.
A141950E03
0.563,1.99 1.344,2.188 0.781,0.198 10 false Ohmmeter 0.646,2.813 3,3.031 2.354,0.219 10 false Engine Coolant Temperature Sensor 0.125,0.167 1.875,0.365 1.75,0.198 10 false Component Side:

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance:
Tester connection Specified Condition
1 (E2) - 2 (THW) 2.29 to 2.60 kΩ at 20 °C (68 °F)
1 (E2) - 2 (THW) 0.300 to 0.327 kΩ at 80 °C (176 °F)


NOTICE:

When checking the engine coolant temperature sensor in water, be careful not to allow water to intrude into the terminals. After checking, clean any water off the engine coolant temperature sensor.


If the result is not as specified, replace the engine coolant temperature sensor.