Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › KNOCK SENSOR
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356945 KNOCK SENSOR G

2TR-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.

Check the resistance.

i.
A093606E02
0.251,0.206 1.058,0.421 0.807,0.215 10 Ohmmeter

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance:
Tester Connection Specified Condition
1 (Ground) - 2 (Output) 120 to 280 kΩ at 20 °C (68 °F)


If the result is not as specified, replace the knock sensor.