Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356946 AIR FUEL RATIO SENSOR G

2TR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.

Inspect the A/F heater.

i.
A430896E01
1.948,0.844 2.156,0.365 false 1.208,1.813 1.448,1.448 false 1.979,1.49 2.281,1.781 false 1.146,0.417 1.448,0.823 false 0.979,0.188 1.594,0.385 0.615,0.198 10 false +B 2.052,0.167 2.667,0.365 0.615,0.198 10 false HA1A 1.031,1.844 1.646,2.042 0.615,0.198 10 false A1A- 2.208,1.854 2.823,2.052 0.615,0.198 10 false A1A+

Measure the resistance between terminals 1 (HT) and 2 (+B) of the sensor.

Standard resistance:

1.8 to 3.4 Ω at 20°C (68°F)


If the result is not as specified, replace the air fuel ratio sensor.


ii.

Measure the resistance between terminals 1 (HT) and 4 (AF-) of the sensor.

Standard resistance:

10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.