Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0356946 AIR FUEL RATIO SENSOR A

2TR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSTALLATION  


PROCEDURE

Hide 89467B 1.INSTALL AIR FUEL RATIO SENSOR

a.
A160991

Using SST, install the air fuel ratio sensor onto the front exhaust pipe assembly.

Torque:
with out SST:

44 N*m (449 kgf*cm, 33 ft.*lbf)

with SST:

40 N*m (408 kgf*cm, 30 ft.*lbf)


NOTICE:
·

Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

·

Do not damage air fuel ratio sensor.

·

The tightening torque when using SST should be measured by arranging the torque wrench and SST linearly.




b.
A160990

Connect the air fuel ratio sensor connector.


Hide 2.INSPECT EXHAUST GAS LEAK