Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › DRIVE BELT
RM2850E _51 Engine / Hybrid System _073288 2TR-FE ENGINE MECHANICAL _0356951 DRIVE BELT A

2TR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 51405A 1.REMOVE NO. 1 ENGINE UNDER COVER

a.

Remove the 6 bolts and engine under cover.


Hide 88310A 2.REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT

a.
A156667E02
2.479,1.448 2.708,1.656 0.229,0.208 10 true A 2.385,2.573 2.5,2.729 0.115,0.156 10 false B

Loosen nut A.


b.

Loosen bolt B and release the belt tension.


c.

Remove the V-ribbed belt.


Hide 16361A 3.REMOVE FAN AND GENERATOR V BELT

a.
A156669E02
1.615,1.802 1.927,2.115 0.313,0.313 10 true Turn

While releasing the belt tension by turning the belt tensioner clockwise, remove the V-ribbed belt from the belt tensioner.

NOTICE:

When removing the drive belt, do not use the idler pulley bolt.


HINT:

After removing the drive belt, move the tensioner upward to the maximum amount.