Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL SENDER GAUGE ASSEMBLY
RM2850E _51 Engine / Hybrid System _073289 2TR-FE FUEL _0356964 FUEL SENDER GAUGE ASSEMBLY A

2TR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 58750 2.REMOVE FUEL TANK INSPECTION HOLE COVER ASSEMBLY

a.
A146772

Remove the 2 screws and the fuel tank inspection hole cover assembly.


Hide 83320 3.REMOVE FUEL SENDER GAGE ASSEMBLY

a.
A388387

Disconnect the fuel sender gauge connector.


b.

Remove the 5 screws and the fuel sender gauge assembly.


c.

Remove the gasket from the fuel sender gauge assembly.