Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM
RM2850E _51 Engine / Hybrid System _073290 2TR-FE EMISSION CONTROL _0356980 EMISSION CONTROL SYSTEM D

2TR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  SYSTEM DESCRIPTION  


This resistor is used to change the air-fuel ratio of the air-fuel mixture.

The idle mixture is adjusted using this resistor.

Turning the idle mixture adjusting screw clockwise moves the contacts inside the resistor, raising the terminal VAF voltage. Conversely, turning the screw counterclockwise lowers the terminal VAF voltage.

When the terminal VAF voltage rises, the ECM increases the injection volume slightly, marking the air-fuel mixture a little richer.