Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the GTS when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.
(a) Clear DTCs (Click here Engine / Hybrid System>2TR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).
(b) Switch the ECM from normal mode to check mode using the tester (Click here Engine / Hybrid System>2TR-FE (ENGINE CONTROL)>SFI SYSTEM>CHECK MODE PROCEDURE).
(c) Perform a simulation test.
(d) Check and wiggle the harness(es), connector(s) and terminal(s).