Home › Engine / Hybrid System › 2TR-FE COOLING › THERMOSTAT
RM2850E _51 Engine / Hybrid System _073291 2TR-FE COOLING _0356995 THERMOSTAT G

2TR-FE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

HINT:

The valve opening temperature is inscribed on the thermostat.


P013560

a.
P000436

Immerse the thermostat in the water and then gradually heat the water.


b.

Check the valve opening temperature of the thermostat.

Standard valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not as specified, replace the thermostat.


c.
A085445E38
2.542,1.542 3.188,1.771 0.646,0.229 10 false 8.5 mm

Check the valve lift.

Standard valve lift:

8.5 mm (0.335 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat temperature is below 77°C (171°F).

If not fully closed, replace the thermostat.