Home › Engine / Hybrid System › 2TR-FE (LUBRICATION) › OIL PRESSURE SWITCH
RM2850E _51 Engine / Hybrid System _073292 2TR-FE LUBRICATION _0357000 OIL PRESSURE SWITCH A

2TR-FE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A431318E01
1.365,0.365 1.938,0.677 false 0.698,0.229 1.677,0.438 0.979,0.208 10 false Adhesive

Apply adhesive to 2 or 3 threads of the switch.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.
A102133

Using a 24 mm deep socket wrench, install the switch.

Torque:

15 N*m (153 kgf*cm, 11 ft.*lbf)


NOTICE:

Do not start the engine within 1 hour after installation.



c.

Connect the switch connector.


Hide 2.INSPECT FOR ENGINE OIL LEAK

a.

Start the engine. Make sure that there are no oil leaks from the area that was worked on.