Home › Engine / Hybrid System › 2TR-FE (LUBRICATION) › OIL PUMP
RM2850E _51 Engine / Hybrid System _073292 2TR-FE LUBRICATION _0357002 OIL PUMP G

2TR-FE LUBRICATION  OIL PUMP  INSPECTION  


PROCEDURE

Hide 15131 1.INSPECT OIL PUMP RELIEF VALVE

a.
A087021

Coat the relief valve with engine oil and drop it into the relief valve hole.


b.

Check that the relief valve falls in smoothly under its own weight.

If it does not, replace the relief valve. If necessary, replace the timing chain cover.


Hide 2.INSPECT OIL PUMP ROTOR SET

a.
A097981E17
0.844,0.896 0.531,0.344 0.531,0.344 0.969,0.823 false 0.25,0.115 0.677,0.292 0.427,0.177 10 false Mark

Install the rotors into the oil pump body with the marks facing outward. Check that the rotors revolve smoothly.


b.

Check the tip clearance.

i.
A087023

Using a feeler gauge, measure the clearance between the drive and driven rotor tips, as shown in the illustration.

Standard tip clearance:

0.040 to 0.160 mm (0.0016 to 0.0063 in.)


Maximum tip clearance:

0.26 mm (0.0102 in.)


If the tip clearance is greater than the maximum, replace the oil pump rotor set.



c.

Check the side clearance.

i.
A087025

Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge, as shown in the illustration.

Standard side clearance:

0.025 to 0.075 mm (0.0010 to 0.0030 in.)


Maximum side clearance:

0.130 mm (0.0051 in.)


If the side clearance is greater than the maximum, replace the oil pump rotor set.



d.

Check the body clearance.

i.
A087024

Using a feeler gauge, measure the clearance between the oil pump body and driven rotor, as shown in the illustration.

Standard body clearance:

0.025 to 0.325 mm (0.0010 to 0.0128 in.)


Maximum body clearance:

0.425 mm (0.0167 in.)


If the body clearance is greater than the maximum, replace the oil pump.