Home › Engine / Hybrid System › 2TR-FE (LUBRICATION) › OIL PUMP
RM2850E _51 Engine / Hybrid System _073292 2TR-FE LUBRICATION _0357002 OIL PUMP A

2TR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP ROTOR SET

a.
A097981E18
0.854,0.896 0.542,0.229 0.542,0.229 0.969,0.813 false 0.177,0.042 0.604,0.219 0.427,0.177 10 false Mark

Coat the oil pump gear set with engine oil and place it into the pump body with the marks facing outward (oil pump cover side). Check that the rotors revolve smoothly.


Hide 2.INSTALL OIL PUMP COVER

a.
A087020

Install the oil pump cover with the 7 bolts.

Torque:

9.0 N*m (92 kgf*cm, 80 in.*lbf)



Hide 15131 3.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the relief valve with engine oil.


b.
A086864

Install the relief valve and spring into the pump body hole.


c.

Install a new gasket onto the plug.


d.

Using a 27 mm socket wrench, install the plug.

Torque:

49 N*m (500 kgf*cm, 36 ft.*lbf)