Home › Engine / Hybrid System › N04C-UH (CHARGING) › GENERATOR
RM2850E _51 Engine / Hybrid System _073313 N04C-UH CHARGING _0357078 GENERATOR G

N04C-UH CHARGING  GENERATOR  INSPECTION  


PROCEDURE

Hide 27370 1.INSPECT GENERATOR BRUSH HOLDER ASSEMBLY

a.
A160023E02
0.646,0.698 1.125,0.875 0.479,0.177 10 false *a

Using a vernier caliper, measure the brush length.

Standard length:

8.4 to 11.5 mm (0.331 to 0.453 in.)


Minimum length:

8.4 mm (0.331 in.)


Text in Illustration

If the length is less than the minimum, replace the generator brush holder assembly.

*a Length


Hide 27330 2.INSPECT GENERATOR ROTOR ASSEMBLY

a.
A160024

Check that the bearing is not rough or worn. If necessary, replace the generator rotor assembly.


b.
A160025E03
0.542,1.094 0.313,0.479 0.313,0.479 0.438,1.167 true 0.208,0.281 0.875,0.448 0.667,0.167 10 false *1 2.438,0.198 2.771,0.448 0.333,0.25 10 false *a

Check the rotor for open circuit.

i.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
Slip Ring - Slip Ring 20°C (60°F) 2.5 Ω


Text in Illustration

If the resistance is not within the standard range, replace the generator rotor assembly.

*1 Slip Rings
*a Ohmmeter



c.
A160026E03
1.625,0.615 1.417,0.813 false 0.792,1.531 0.573,1.24 false 1.646,0.5 2.021,0.667 0.375,0.167 10 false *2 2.417,0.24 2.802,0.427 0.385,0.188 10 false *a 0.844,1.479 1.438,1.646 0.594,0.167 10 false *1

Check the rotor for a short circuit.

i.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Specified Condition
Slip Ring - Rotor 10 kΩ or higher


Text in Illustration

If the result is not as specified, replace the generator rotor assembly.

*1 Slip Ring
*2 Rotor
*a Ohmmeter



d.
A160027

Using a vernier caliper, measure the slip ring diameter.

Standard diameter:

14.0 to 14.4 mm (0.551 to 0.567 in.)


Minimum diameter:

14.0 mm (0.551 in.)


If the diameter is less than the minimum, replace the generator rotor assembly.