CHECK DOOR CONTROL RELAY
Disconnect the door control relay connector.
Measure the voltage and resistance of the wireharness side connector.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| J47-3 (BECU) - Body ground | L - Body ground | Battery Power Supply | Always | 11 to 14 V |
| J47-2 (E) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| J47-6 (L1) - J47-4 (UL1) | GR - G | Door Control SwitchSignal Input | Always | 10 kΩ or higher |
Reconnect the door control relay connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| J47-8 (ACT+) - Body ground | B - Body ground | Door Control Switch Signal Output | Door lock unlock switch or Door lock switch RH ON (LOCK) | 11 to 14 V → Below 1 V |
| J47-7 (ACT-) - Body ground | R - Body ground | Door Control Switch Signal Output | Door lock unlock switch or Door lock switch RH ON (LOCK) | 11 to 14 V → Below 1 V |
| J47-6 (L1) - Body ground | GR - Body ground | Door Control Switch Signal Output | Door lock unlock switch or Door lock switch RH ON (LOCK) | 5 V or higher → Below 1 V |
| J47-4 (UL1) - Body ground | G - Body ground | Door Control Switch Signal Output | Door lock unlock switch or Door lock switch RH ON (LOCK) | 5 V or higher → Below 1 V |