Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR
RM2850E _53 Suspension _073449 FRONT SUSPENSION _0357514 FRONT STABILIZER BAR G

FRONT SUSPENSION  FRONT STABILIZER BAR  INSPECTION  


PROCEDURE

Hide 48810 1.INSPECT FRONT STABILIZER LINK ASSEMBLY LH

a.
C369533

As shown in the illustration, move the ball joint stud back and forth 5 times before installing the nut.


b.

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the fifth turn.

Turning torque:

0.05 to 1.96 N*m, (0.6 to 19.9 kgf*cm, 0.5 to 17.3 in.*lbf) or less



c.

Check for any cracks and grease leaks on the ball joint dust cover.