1. JACK UP AND SUPPORT FRAME
Jack up and support the frame on stands.
Lower the axle housing until the leaf spring tension is free, and keep it at this position.
48840A
2.DISCONNECT STABILIZER BAR LINK (w/STABILIZER BAR)
Remove the 2 nut and disconnect the left and right stabilizer bar links from the spring seats.
If the ball joint stud turns together with the nut, use a hexagon wrench to hold the stud.
48540
3.DISCONNECT REAR SHOCK ABSORBER
Remove the bolt and disconnect the rear shock absorber lower from spring seat.
4.REMOVE U-BOLTS
Remove the 4 U-bolt mounting nuts.
Remove the spring seat and pad.
Remove the U-bolts.
48220
5.REMOVE REAR LEAF SPRING
Remove the bolt and spring pin stopper.
Remove the hanger pin bolt.
Remove the 2 shackle pin mounting nuts.
Remove the shackle pin and plate and remove the rear leaf spring.