The parking brake will no longer have any effect when the propeller shaft is removed, so perform the following procedures with the vehicle on a flat surface and its wheels secured with wheel chocks to prevent the vehicle from moving.
1.REMOVE REAR PROPELLER SHAFT ASSEMBLY
Place matchmarks on the rear propeller shaft flange and the rear differential companion flange.
| *a | Matchmark |
Remove the 4 nuts, 4 bolts and 4 washers, and separate the rear propeller shaft assembly.
Place matchmarks on the rear propeller shaft flange and the center propeller shaft flange.
| *a | Matchmark |
Remove the 4 nuts, 4 bolts, 4 washers and the rear propeller shaft assembly.
2.REMOVE CENTER PROPELLER SHAFT ASSEMBLY (for Short Wheelbase)
Remove the 2 nuts, 2 bolts and 2 collars, and separate the center propeller shaft assembly.
Place matchmarks on the center propeller shaft flange and the parking brake drum sub-assembly.
| *a | Matchmark |
Remove the 4 nuts, 4 washers and the center propeller shaft assembly.
3.REMOVE CENTER PROPELLER SHAFT ASSEMBLY (except Short Wheelbase)
Remove the 2 nuts, 2 bolts and 2 collars, and separate the center propeller shaft assembly.
Place matchmarks on the center propeller shaft flange and the front propeller shaft flange.
| *a | Matchmark |
Remove the 4 nuts, 4 bolts, 4 washers and the center propeller shaft assembly.
4.REMOVE FRONT PROPELLER SHAFT ASSEMBLY (except Short Wheelbase)
Remove the 2 nuts, 2 bolts and 2 collars, and separate the front propeller shaft assembly.
Place matchmarks on the front propeller shaft flange and the parking brake drum sub-assembly.
| *a | Matchmark |
Remove the 4 nuts, 4 washers and the front propeller shaft assembly.