Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR (Only for Israel) › 2017.01–2021.01
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0358149 REAR SPEED SENSOR(Only for Israel) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR(Only for Israel)  REMOVAL  


PROCEDURE

Hide 1.REMOVE SPEED SENSOR

a.
C396115

Disconnect the speed sensor connector.


b.

Remove the 3 resin clips and 5 clamp bolts holding the sensor wire harness to the frame, upper control arm and axle housing.

Torque:

18 N*m (185 kgf*cm, 13 ft*lbf)



c.

Remove the 2 bolts and protectors.

Torque:

18 N*m (185 kgf*cm, 13 ft*lbf)



d.
C396116

Remove the mounting bolt and speed sensor.

Torque:

18 N*m (185 kgf*cm, 13 ft*lbf)