Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE ACTUATOR (w/ Brake pedal Load Sensing Switch) › 2017.01–2021.01
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0358153 BRAKE ACTUATOR(w/ Brake pedal Load Sensing Switch) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE ACTUATOR(w/ Brake pedal Load Sensing Switch)  REMOVAL  


PROCEDURE

Hide 1.DRAIN BRAKE FLUID

Hide 2.REMOVE FRONT BUMPER

Hide 3.REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET

a.
C370897

Pull the lock lever upward and disconnect the connector.

NOTICE:

Be careful not to allow brake fluid to enter the removed connector.



b.

Detach the harness clamp.


c.
C370892

Using a union nut wrench, disconnect the 4 brake lines from the brake actuator with bracket.

NOTICE:

Do not damage or bend the brake tube when disconnecting it.



d.

Remove the 2 brake tubes from the brake actuator with bracket.


e.
C364102

Using a union nut wrench, disconnect the 4 brake lines from the brake actuator with bracket.

NOTICE:

Do not damage or bend the brake tube when disconnecting it.



f.
C370898

Remove the 4 bolts to remove the brake actuator with bracket from the body.