Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE ACTUATOR (w/ Brake pedal Load Sensing Switch) › 2017.01–2021.01
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0358153 BRAKE ACTUATOR(w/ Brake pedal Load Sensing Switch) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE ACTUATOR(w/ Brake pedal Load Sensing Switch)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL BRAKE ACTUATOR BOLT CUSHION

a.

Install the 3 brake actuator bolt cushions to the brake actuator bracket assembly.


Hide 2.INSTALL BRAKE ACTUATOR CASE COLLAR

a.

Install the 3 brake actuator case collars to the brake actuator bolt cushion.


Hide 3.REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY

a.
C364103E01
0.802,0.875 0.958,1.073 0.156,0.198 10 false C 2.625,0.542 2.781,0.74 0.156,0.198 10 false B 2.167,1.719 2.323,1.917 0.156,0.198 10 false A

Install the brake actuator bracket to the brake actuator assembly with the 3 bolts.

Torque:

5.4N*m ( 55kgf*cm , 48in.*lbf )


HINT:

tighten the bolts in the order A, B and C.



Hide 4.INSTALL NO. 1 BRAKE ACTUATOR BRACKET

a.
C370896

Install the No. 1 brake actuator bracket to the brake actuator assembly with the 2 bolts.

Torque:

19N*m ( 194kgf*cm , 14 ft.*lbf )