Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR (w/ Brake pedal Load Sensing Switch) › 2017.01–2021.01
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0358157 REAR SPEED SENSOR(w/ Brake pedal Load Sensing Switch) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR(w/ Brake pedal Load Sensing Switch)  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.REMOVE SKID CONTROL SENSOR WIRE

a.
C364095

Remove the bolt and detach the 4 clamps.


b.

Disconnect the connector.


c.
C364096

Remove the bolt and disconnect the speed sensor bracket.


d.

Remove the bolt.

C370926E01
0.094,0.063 0.406,0.26 0.313,0.198 10 false *a 3.542,0.104 3.854,0.302 0.313,0.198 10 false *b

Text in Illustration
*a for Type A *b for Type B


e.

for Type A:

Detach the guide and disconnect the connector.


f.

for Type B:

Disconnect the connector.


g.
C364097

Detach the 3 clamps and disconnect the connector.


h.

Remove the skid control wire from the body.


Hide 3.REMOVE REAR SPEED SENSOR LH

a.
C364098

Remove the bolt and rear speed sensor LH.

NOTICE:

Prevent foreign matter from attaching to the sensor tip.



Hide 4.REMOVE REAR SPEED SENSOR RH

HINT:

Use the same procedure described for the LH side.