84540
1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
Disconnect the connector from the park/neutral position switch assembly.
Using an ohmmeter, measure the resistance with the shift lever in each position.
| Shift Position | Tester Connection | Specified Connection |
|---|---|---|
| P | 7 to 8 | Below 1Ω |
| Except P | ↑ | 10kΩ or higher |
| R | 4 to 7 | Below 1Ω |
| Except R | ↑ | 10kΩ or higher |
| N | 3 to 7 | Below 1Ω |
| Except N | ↑ | 10kΩ or higher |
| D | 2 to 7 | Below 1Ω |
| Except D | ↑ | 10kΩ or higher |
| 2 | 7 to 9 | Below 1Ω |
| Except 2 | ↑ | 10kΩ or higher |
| L | 1 to 7 | Below 1Ω |
| Except L | ↑ | 10kΩ or higher |