If any of the following codes is recorded, the engine ECU enters fail-safe mode.
| DTC No. | Fail-Safe Operation | Fail-Safe Deactivation Conditions |
|---|---|---|
| P0105/31 | ·
Manifold absolute pressure is fixed at 28.4 kPa (213 mmHg, 8.4 in.Hg) |
Returned to normal condition |
| P0110/24 | Intake air temp. is fixed at 20° C (68° F) | Returned to normal condition |
| P0115/22 | Water temp. is fixed at 80°(176°F) | Returned to normal condition |
| P0120/41 | VTA is fixed at 0° | The following condition must be repeated at least 2 times consecutively
When closed throttle position switch is ON: 0.1 V or higher VTA and 0.95 V |
| P0500/42 | High RPM for cut is prohibited
ISC control prohibited |
Returned to normal condition |
| P1300/14 | ·
Fuel cut ·
Prohibit ignition |
Returned to normal condition |