Home › General › SPECIFICATIONS › N04C-VQ ENGINE CONTROL
RM2850E _V1 General _073185 SPECIFICATIONS _0364990 N04C-VQ ENGINE CONTROL F

SPECIFICATIONS  N04C-VQ ENGINE CONTROL  SERVICE DATA  


diesel throttle body Percentage Throttle valve opening position 80 to 90 % at During idling 0 to 70 % at 1500 rpm
Standard Voltage h1-2 (VCR) - Body ground 11 to 14 V
Standard Resistance 2 (VCR) - 3 (E2R) 2 to 10 kΩ at 20°C (68°F)
Accelerator pedal Standard Voltage Accel Sensor Out No. 1 Accelerator pedal is released:
0.6 to 1.0 V
Standard Voltage Accelerator pedal is depressed:
2.8 to 3.6 V
Standard Voltage Accel Sensor Out No. 2 Accelerator pedal is released:
1.4 to 1.8 V
Standard Voltage Accelerator pedal is depressed:
3.6 to 4.4 V
Mass air flow meter
(Intake air temperature sensor)
Standard Resistance 1 (THA) - 2 (E2) 13.6 to 18.4 kΩ at -20°C (-4°F)
2.21 to 2.69 kΩ at 20°C (68°F)
0.49 to 0.67 kΩ at 60°C (140°F)
Crankshaft position sensor Standard Resistance 1 - 2 1630 to 2740 Ω at -10 to 50°C (14 to 122°F)
2065 to 3225 Ω at 50 to 100°C (122 to 212°F)
Engine coolant temperature sensor Standard Resistance 1 (THW) - 2 (E2) 2.32 to 2.59 kΩ at 20°C (68°F)
0.310 to 0.326 kΩ at 80°C (176°F)
intake air temperature sensor Standard Resistance 1 - 2 5.37 to 7.95 kΩ at 20°C (68°F)
1.87 to 2.60 kΩ at 50°C (122°F)
Manifold absolute pressure sensor Standard Voltage B104-13 (VC) - B104-14 (E2) 4.75 to 5.25 V (Ignition switch ON)
Standard Voltage B104-5 (PIM) - B104-14 (E2) 0.1 to 0.7 V (When negative pressure of 40 kPa {300 mmHg} is applied)
0.8 to 1.5 V (Open to atmosphere)
1.6 to 2.3 V (When positive pressure of 70 kPa (0.7 kgf/cm2) is applied)