Home › General › SPECIFICATIONS › N04C-VQ FUEL
RM2850E _V1 General _073185 SPECIFICATIONS _0364992 N04C-VQ FUEL F

SPECIFICATIONS  N04C-VQ FUEL  SERVICE DATA  


*: The output voltage changes depending on the voltage applied to the terminals.

Injector assembly Standard resistance
1 - 2
0.37 to 0.57 Ω at 20 °C (68 °F)
Suction control valve (Supply pump assembly) Standard resistance
1 - 2
1.9 to 2.7 Ω at 20 °C (68 °F)
Fuel temperature sensor (Supply pump assembly) Standard resistance
1 - 2
2.32 to 2.59 kΩ at 20 °C (68 °F)
0.310 to 0.326 kΩ at 80 °C (176 °F)
Fuel pressure sensor (Common rail assembly) Standard resistance
2 - 3
5 - 4
16.4 kΩ or less at 25 °C (77 °F
Standard resistance
1 - 2
6 - 5
3 kΩ or less at 25 °C (77 °F)
Level warning switch Standard resistance
Switch ON
1 - 2
Below 1 Ω
Standard resistance
Switch OFF
1 - 2
10 kΩ or higher
Fuel sender gauge assembly Standard voltage
2 - 3
4.255 to 4.065 V* at F (Upper End)
0.345 to 0.695 V* at E (Lower End)