Home › Engine / Hybrid System › 14B (ENGINE MECHANICAL) › TIMING GEAR › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073170 14B ENGINE MECHANICAL _0356052 TIMING GEAR A

14B ENGINE MECHANICAL  TIMING GEAR  REPLACEMENT OF CAMSHAFT (OR CAMSHAFT TIMING GEAR)  


PROCEDURE

Hide 1.REMOVE CAMSHAFT

a.
A430613

Using SST, remove the bolt and plate washer.

SST
09960-10010  (09962-01000, 09963-01000)


b.
A430614

Using a 19 mm socket wrench and press, press out the camshaft.


Hide 2.INSTALL NEW CAMSHAFT

a.
A430615

Install the timing gear set key to the camshaft.


b.

Assembly the camshaft, thrust plate and timing gear as shown.


c.
A430616

Using a 29 mm socket wrench and press, align the timing gear set key with the key groove of the timing gear, and press in the camshaft timing gear.


d.
A430617

Using SST, install the plate washer and bolt. Torque the bolt.

SST
09960-10010  (09962-01000, 09963-01000)

Torque:

37.5 N*m (382 kgf*cm, 28 ft.*lbf)



Hide 3. CAMSHAFT THRUST CLEARANCE

Standard thrust clearance:

0.060 - 0.130 mm (0.0024 - 0.0051 in.)


Maximum thrust clearance:

0.30 mm (0.0118 in.)