Home › Drivetrain › CLUTCH › CLUTCH BOOSTER
RM2850E _52 Drivetrain _073140 CLUTCH _0355892 CLUTCH BOOSTER N

CLUTCH  CLUTCH BOOSTER  ADJUSTMENT  


PROCEDURE

Hide 1.ADJUST LENGTH OF BOOSTER PUSH ROD

a.
C396658

Set SST on the master cylinder, and lower the pin until its tip slightly touches the piston.

SST 09737-00011


b.

Turn SST upside down, and set it on the booster.


c.

Measure the clearance between the booster push rod and pin head (SST).

Clearance:

0 mm (0 in.)



d.
C396659

Adjust the booster push rod length until the push rod lightly touches the pin head.

HINT:

When adjusting the push rod, depress the clutch pedal enough so that the push rod sticks out.