Home › General › SPECIFICATIONS › AIR CONDITIONING › 2017.01–2019.08
RM2850E _V1 General _073185 SPECIFICATIONS _0366728 AIR CONDITIONING F

SPECIFICATIONS  AIR CONDITIONING  SERVICE DATA  


Refrigerant charge volume 1800 +/-50 g (60.9 +/-1.8 oz)
Magnetic clutch clearance for 1HZ 0.6 to 1.0 mm (0.024 to 0.039 in.)
for N04C-UH 0.6 to 1.0 mm (0.024 to 0.039 in.)
for N04C-VL 0.6 to 1.0 mm (0.024 to 0.039 in.)
for N04C-VQ 0.6 to 1.0 mm (0.024 to 0.039 in.)
for 2TR-FE 0.6 to 1.0 mm (0.024 to 0.039 in.)
for 14B 0.4 to 07 mm (0.016 to 0.028 in.)
COOLER CONDENSER FAN RELAY ASSEMBLY A-1 - B-2: Below 1 Ω(Not apply battery voltage to terminals A-2 and A-4)
A-3 - B-4: Below 1 Ω(Not apply battery voltage to terminals A-2 and A-4)
B-1 - B-2: 10 kΩ or higher(Not apply battery voltage to terminals A-2 and A-4)
B-3 - B-4: 10 kΩ or higher(Not apply battery voltage to terminals A-2 and A-4)
A-1 - B-2: 10 kΩ or higher(Apply battery voltage to terminals A-2 and A-4)
A-3 - B-4: 10 kΩ or higher(Apply battery voltage to terminals A-2 and A-4)
B-1 - B-2: Below 1 Ω(Apply battery voltage to terminals A-2 and A-4)
B-3 - B-4: Below 1 Ω(Apply battery voltage to terminals A-2 and A-4)
HEATER RELAY (FR HTR) 3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)
HEATER RELAY (RR HTR) 3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)
HEATER PUMP RELAY (W/PMP) 3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)
AIR CONDITIONER RELAY (RR HTR M/V) 3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)
COOLER RELAY ASSEMBLY (A/C FAN No.1, No.2, No.3, No.4) 3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)
CONDENSER FAN RELAY (CDS FAN) 3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)
AIR CONDITIONING COMPRESSOR RELAY (A/C COMP) 3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)
STARTER CUT RELAY (A/C CUT) 3 - 4: Below 1 Ω
3 - 4: 10 kΩ or higher(Apply battery voltage to terminals 1 and 2)
3 - 5: 10 kΩ or higher
3 - 5: Below 1 Ω(Apply battery voltage to terminals 1 and 2)