Home › Brake › PARKING BRAKE › PARKING BRAKE ASSEMBLY (for Parking Brake Drum with Inner Diameter of 200 mm)
RM2850E _54 Brake _073229 PARKING BRAKE _0356453 PARKING BRAKE ASSEMBLY(for Parking Brake Drum with Inner Diameter of 200 mm) N

PARKING BRAKE  PARKING BRAKE ASSEMBLY(for Parking Brake Drum with Inner Diameter of 200 mm)  ADJUSTMENT  


PROCEDURE

Hide 1. JACK UP AND SUPPORT VEHICLE

Hide 2.ADJUST BRAKE SHOE CLEARANCE (Parking Brake Drum with Inner Diameter of 200 mm)

a.
C397300

Remove the hole plug.


b.

Turn the shoe adjuster and expand the shoe until the brake drum locks.


c.

Return the shoe adjuster 7 notches.


d.

Install the hole plug.


e.
C397301

With the parking brake pulled its full distance, check to see that the drum is locked.


f.

Release the parking brake lever and ensure that the parking brake is not dragging.

If dragging, turn the shoe adjuster counterclockwise another notch.


g.

Check that the parking brake lever travel is correct.