| Intake air flow meter sub-assembly | Standard resistance | 4 (THA) - 5 (E2) | 12.5 to 16.9 kΩ at -20°C (-4°F) |
| 4 (THA) - 5 (E2) | 2.19 to 2.67 kΩ at 20°C (68°F) | ||
| 4 (THA) - 5 (E2) | 0.5 to 0.68 kΩ at 60°C (140°F) | ||
| Camshaft timing oil control valve assembly | Standard resistance | 6.9 to 7.9 Ω at 20°C (68°F) | |
| Specified condition | Battery positive (+) voltage is applied | Valve moves to left as indicated by the arrow | |
| Battery positive (+) voltage is cut off | Valve moves to right as indicated by the arrow | ||
| Camshaft position sensor | Standard resistance | 1 (G+) - 2 (G-) | 950 to 1250 Ω at 20°C (68°F) |
| Crankshaft position sensor | Standard resistance | 1 (NE+) - 2 (NE-) | 1850 to 2450 Ω at 20°C (68°F) |
| Engine coolant temperature sensor | Standard resistance | 1 (E2) - 2 (THW) | 2.29 to 2.60 kΩ at 20°C (68°F) |
| 1 (E2) - 2 (THW) | 0.300 to 0.327 kΩ at 80°C (176°F) | ||
| Throttle with motor body assembly | Standard throttle valve opening percentage | 60 % to more | |
| Knock control sensor | Standard resistance | 1 (Ground) - 2 (Output) | 120 to 280 kΩ at 20°C (68°F) |
| EFI main relay | Standard resistance | 3 - 5 | Below 1 Ω (Apply battery voltage to the terminals 1 and 2) |
| 10 kΩ or higher | |||
| C/ OPN relay | Standard resistance | 3 - 5 | Below 1 Ω (Apply battery voltage to the terminals 1 and 2) |
| 10 kΩ or higher | |||
| Accelerator pedal assembly | Accelerator pedal position No. 1 standard voltage | Accelerator pedal | 0.4 to 1.4 V |
| Accelerator pedal depressed | 0.3 to 4.6 V | ||
| Accelerator pedal position No. 2 standard voltage | Accelerator pedal | 0.9 to 2.3 V | |
| Accelerator pedal depressed | 0.3 to 4.6 V | ||
| Air fuel ratio sensor | Standard resistance | 1 (HT) - 2 (+B) | 1.8 to 3.4 kΩ at 20°C (68°F) |
| 1 (HT) - 4 (AF-) | 10 kΩ or higher | ||
| Heated oxygen sensor | Standard resistance | 1 (HT) - 2 (+B) | 11 to 16 kΩ at 20°C (68°F) |
| 1 (HT) - 4 (E1) | 10 kΩ or higher | ||