Home › General › SPECIFICATIONS › 2TR-FE ENGINE CONTROL
RM2850E _V1 General _073185 SPECIFICATIONS _0367029 2TR-FE ENGINE CONTROL F

SPECIFICATIONS  2TR-FE ENGINE CONTROL  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf
Negative battery terminal x Cable 3.9 40 35 in.*lbf
Camshaft timing oil control valve assembly x Cylinder head assembly 9.0 92 80 in.*lbf
Front engine service cover panel sub-assembly x Body 6.0 61 53 in.*lbf
Shift wire clamp x Front engine service cover panel sub-assembly 12 122 9
Floor shift shift lever assembly x Front engine service cover panel sub-assembly Bolt A 7.5 76 66 in.*lbf
Bolt B 12 122 9
Select cable x Floor shift shift lever assembly 15 153 11
Shift and select lever support with boots x Floor shift shift lever assembly 6.0 61 53 in.*lbf
Camshaft position sensor x Timing chain cove 9.0 92 80 in.*lbf
Crankshaft position sensor x Timing chain cove 9.0 92 80 in.*lbf
Engine coolant temperature sensor x Cylinder block 20 200 15
Throttle with motor body assembly x Intake manifold 10 102 7
Intake air connector x Cylinder head cover 8.0 82 71 in.*lbf
Intake air connector x Throttle with motor body assembly X air hose Bolt A 5.0 51 44 in.*lbf
Bolt B 4.8 49 42 in.*lbf
Knock sensor x Cylinder block 20 204 15
Intake manifold x Cylinder head x Cylinder block 25 255 18
Wire harness bracket x Intake manifold 8.0 82 71 in.*lbf
ECM x Body 5.5 56 49 in.*lbf
Accelerator pedal assembly x Body Bolt A 18 184 13
Bolt B 12 122 9
Air fuel ratio sensor x Front exhaust pipe assembly For use with SST 40 408 30
For use without SST 44 449 33
Heated oxygen sensor x Catalytic converter assembly For use with SST 40 408 30
For use without SST 44 449 33