42621
1.REMOVE WHEEL CAP (for Front Side)
for Full Wheel Cap Type:
Remove the 3 bolts, wave washer and 3 washers.
Remove the wheel cap from the vehicle.
for Semi Wheel Cap Type:
Remove the 3 screws and wheel cap from the vehicle.
42621
2.REMOVE WHEEL CAP (for Rear Side)
for Full Wheel Cap Type:
Remove the 3 bolts, wave washer and 3 washers.
Remove the wheel cap from the vehicle.
for Semi Wheel Cap Type:
Remove the 2 screws and wheel cap from the vehicle.
42622
3.REMOVE WHEEL CAP HOLDER (for Rear Side)
Perform this procedure for full wheel cap type only.
Remove the 3 bolts and wheel cap holder (outside) from the vehicle.
Remove the 6 nuts and wheel cap holder (inside) from the vehicle.
4.REMOVE WHEEL ASSEMBLY
Loosen the axle hub nut approximately 90°.
Jack up the vehicle.
except for Rear Inside Tire:
Remove the axle hub nut and wheel assembly.
for Rear Inside Tire:
Remove the stop bolt.
Remove the wheel assembly.