Home › General › SPECIFICATIONS › 14B CHARGING › 2017.01–2019.08
RM2850E _V1 General _073185 SPECIFICATIONS _0367624 14B CHARGING F

SPECIFICATIONS  14B CHARGING  SERVICE DATA  


Battery Electrolyte volume 1.25 to 1.29 at 20°C (68°F)
Voltage 12.6 to 12.8 V at 20°C (68°F)
Battery terminal and fuse Resistance Below 1 Ω
Drive belt Single Belt Type Deflection New belt 8 to 11 mm (0.31 to 0.43 in.)
Used belt 11 to 16 mm (0.43 to 0.63 in.)
Double Belt Type New belt 9.5 to 13 mm (0.374 to 0.51 in.)
Used belt 14 to 16 mm (0.55 to 0.79 in.)
Single Belt Type Tension New belt 421 to 657 N (43 to 67kgf, 94.6 to 147.7 lbf)
Used belt 245 to 441 N (25 to 45kgf, 55.1 to 99.1 lbf)
Double Belt Type New belt 275 to 510 N (28 to 52kgf, 61.8 to 114.7 lbf)
Used belt 196 to 392 N (20 to 40kgf, 44.1 to 88.1 lbf)
Charging circuit without load Current 10 A or higher
Voltage 12.9 to 14.9 V
Charging circuit with load Current 30 A or higher
Generator brush holder assembly Exposed brush length Standard 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum 4.5 mm (0.177 in.)
Generator rotor assembly Resistance Rotor for open circuit 2.3 to 2.7 Ω
Rotor for a short circuit 10 MΩ or higher
Slip ring diameter Standard 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum 14.0 mm (0.551 in.)