Home › General › SPECIFICATIONS › POWER ASSIST SYSTEMS
RM2850E _V1 General _073185 SPECIFICATIONS _0367948 POWER ASSIST SYSTEMS F

SPECIFICATIONS  POWER ASSIST SYSTEMS  SERVICE DATA  


Power Steering Fluid
Maximum fluid level increase 5 mm (0.20 in.)
Fluid pressure at idle speed with valve closed except N04C Series Engine 7,845 kPa (80 kgf/cm2, 1,138 psi)
for N04C Series Engine 10900 to 11700 kPa (111 to 119 kgf/cm2, 1581 to 1697 psi)
Fluid pressure at engine speeds of 1000 rpm and 3000 rpm 490 kPa (5 kgf/cm2, 71 psi) or less
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position except N04C Series Engine 7,845 kPa (80 kgf/cm2, 1,138 psi)
for N04C Series Engine 10900 to 11700 kPa (111 to 119 kgf/cm2, 1581 to 1697 psi)

Vane Pump(for N04C Series Engine)
Vane pump shaft and vane pump housing oil maximum clearance 0.07 mm (0.0028 in.)
Vane plate thickness 1.405 to 1.411 mm (0.05531 to 0.05555 in.)
Vane pump rotor groove and vane pump plate maximum clearance 0.03 mm (0.0012 in.)
Compression spring free minimum length (Reference) 31.3 mm (1.232 in.)
Vane pump rotating torque 0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less

Vane Pump(except N04C Series Engine)
Flow control valve spring length (STD) 50 mm (1.97 in.)
Flow control valve spring length (Minimum) 55 mm (2.17 in.)
Vane pump rotating torque 0.2 N*m (2.0 kgf*cm, 1.7 in.*lbf) or less