Home › Drivetrain › A861E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM › from 2019.08
RM2850E _52 Drivetrain _082622 A861E AUTOMATIC TRANSMISSION / TRANSAXLE _0398655 AUTOMATIC TRANSMISSION SYSTEM D

A861E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / ECT / Trouble Codes.


e.

Confirm the DTCs and freeze frame data, and then write them down.




CLEAR DTC (Using GTS)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / ECT / Trouble Codes.


e.

Clear the DTCs.



CLEAR DTC (Without using GTS)


a.

Turn the ignition switch to ON.


b.
C140838C17
1.594,1.167 1.292,1.781 true 1.802,1.49 1.958,1.781 true 0.135,0.094 0.365,0.302 0.229,0.208 10 false *1 1.156,1.844 1.438,2.021 0.281,0.177 10 false CG 1.917,1.854 2.167,2.031 0.25,0.177 10 false TC
*1 DLC3


After repairing the malfunction, using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3 for 3 seconds or more.

NOTICE:

Confirm the terminal numbers before connecting them. Connecting the wrong terminals can damage the engine.



c.

Turn the O/D switch on the shift lever knob off (O/D prohibited) for 3 seconds or more. (O/D OFF indicator light illuminates)


d.

Turn the ignition switch off.


e.

Disconnect terminals 13 (TC) and 4 (CG) of the DLC3.