89429A
1.INSPECT TEMPERATURE SENSOR
| *a | Component without harness connected
(Temperature Sensor) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 196 Ω to 469 kΩ |
| 1 - Body ground | Always | 10 kΩ or higher |
| 2 - Body ground | Always | 10 kΩ or higher |
If the resistance is out of the specified range at either of the ATF temperatures shown in the table below, the driveability of the vehicle maydecrease.
| ATF Temperature | Specified Condition |
|---|---|
| 115°C (239°F) | 657 to 727 Ω |
| 120°C (248°F) | 585 to 647 Ω |
| 145°C (293°F) | 339 to 375 Ω |
| 155°C (311°F) | 278 to 308 Ω |