Home › Drivetrain › A861E (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › from 2019.08
RM2850E _52 Drivetrain _082622 A861E AUTOMATIC TRANSMISSION / TRANSAXLE _0398780 PARK / NEUTRAL POSITION SWITCH A

A861E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 33820B 1.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C135317

Remove the nut and disconnect the transmission control cable assembly from the transmission control shaft lever LH.


Hide 35573 2.REMOVE TRANSMISSION CONTROL SHAFT LEVER LH

a.
C135318

Remove the double nut and transmission control shaft lever LH from the park/neutral position switch assembly.


Hide 84540 3.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C135319C02
0.917,0.5 1,0.5 1,0.5 1.729,0.906 true 1.917,1.25 2.167,1.417 2.167,1.417 2.25,1.417 true 0.708,0.417 0.875,0.583 0.167,0.167 10 true *a 2.292,1.333 2.458,1.5 0.167,0.167 10 true *b
*a Nut Stopper
*b Lock Nut


Disconnect the park/neutral position switch assembly connector.


b.

Using a screwdriver, unstake the nut stopper and remove the lock nut and nut stopper.


c.
C135320

Remove the 2 bolts and park/neutral position switch assembly from the automatic transmission assembly.