Home › Engine / Hybrid System › 1HZ (EXHAUST) › EXHAUST PIPE › from 2019.08
RM2850E _51 Engine / Hybrid System _082621 1HZ EXHAUST _0399858 EXHAUST PIPE A

1HZ EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 17430 1.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.

for LHD:

i.
A448766

Remove the bolt and 2 nuts.


ii.
A448767

Remove the 2 through bolts, 2 compression springs and tail exhaust pipe assembly.


iii.

Remove the gasket.



b.

for RHD:

i.
A448768

Remove the 4 nuts.


ii.
A448769

Remove the 2 through bolts, 2 compression springs and tail exhaust pipe assembly.


iii.

Remove the gasket.



Hide 44773D 2.DISCONNECT SOLENOID TO RETARDER HOSE (w/ Exhaust Retarder Assembly)

a.
A144575

Slide the clamp and disconnect the solenoid to retarder hose.


Hide 17420 3.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.
A448770

Remove the 2 nuts.


b.

w/ Exhaust Retarder Assembly:

Remove the 4 bolts, center exhaust pipe assembly and exhaust retarder assembly.


c.

w/o Exhaust Retarder Assembly:

Remove the 4 bolts, center exhaust pipe assembly and front exhaust pipe spacer.


d.

Remove the 2 gaskets.


Hide 17410 4.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A448771

Remove the bolt.


b.

Remove the 3 nuts and front exhaust pipe assembly.


c.

Remove the gasket.