Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › ECD SYSTEM › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0399963 ECD SYSTEM D

N04C-WA ENGINE CONTROL  ECD SYSTEM  INITIALIZATION  


INTAKE THROTTLE VALVE INITIALIZATION


NOTICE:

Always perform this procedure (initialization) after replacing the diesel throttle body or ECM.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.

NOTICE:

Do not start the engine.



c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Utility / Intake Throttle Valve Initialization.


e.

According to the display on the GTS, perform diesel throttle body initialization.