Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › ECD SYSTEM › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0399963 ECD SYSTEM D

N04C-WA ENGINE CONTROL  ECD SYSTEM  DTC CHECK / CLEAR  


PREPARATIONS FOR INSPECTION


a.

Move the shift lever to N (manual transmission).


b.

Move the shift lever to N or P (automatic transmission).


c.

Turn the air conditioning off.



CHECK DTC


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on


d.

Enter the following menus: Powertrain / Engine / Trouble Codes.


e.

Check the "Current", "Pending" and "History" items.

HINT:
GTS Display Description
Current DTC indicating a malfunction
Pending DTC indicating a pending malfunction
History DTC indicating a past malfunction


HINT:
·

A pending malfunction indicates a malfunction which is stored in the ECM on the 1st trip for DTCs that use 2 trip detection logic.

·

Freeze frame data is stored for each of the current DTCs, pending DTCs and past DTCs.






CLEAR DTC


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON (do not start the engine).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Trouble Codes / Clear.

NOTICE:

Clear the DTCs with the engine stopped, as DTCs cannot be cleared while the engine is running.