Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0400257 DIFFERENTIAL PRESSURE SENSOR A

N04C-WA EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 89480A 1.REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY

a.
A448758

Disconnect the differential pressure sensor assembly connector.


b.

Slide the 2 clips and disconnect the No. 1 air hose and No. 2 air hose from the No. 1 exhaust pipe converter assembly.


c.

Remove the 2 bolts and sensor bracket.


d.

Remove the bolt and differential pressure sensor assembly from the sensor bracket.


e.

Slide the 2 clips and disconnect the No. 1 air hose and No. 2 air hose from the differential pressure sensor assembly.