Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › DPR SWITCH ASSEMBLY › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0400259 DPR SWITCH ASSEMBLY G

N04C-WA EMISSION CONTROL  DPR SWITCH ASSEMBLY  INSPECTION  


PROCEDURE

Hide 84270K 1.INSPECT DPR SWITCH ASSEMBLY

a.
A356573C03
0.635,0.729 0.969,0.729 0.969,0.729 1.396,1.156 true 2.573,0.708 2.281,0.708 2.281,0.708 2.042,1.135 true 0.125,0.094 0.438,0.292 0.313,0.198 10 false *a 0.51,0.667 0.823,0.865 0.313,0.198 10 false B 2.635,0.646 2.802,0.875 0.167,0.229 10 false E
*a Component without harness connected
(DPR Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (E) - 4 (B) Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the DPR switch assembly.