Home › Vehicle Interior › ENGINE HOOD / DOOR › AUTO CENTER DOOR UNIT (for Glide Type) › from 2019.08
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0400791 AUTO CENTER DOOR UNIT(for Glide Type) A

ENGINE HOOD / DOOR  AUTO CENTER DOOR UNIT(for Glide Type)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Before disassembling and assembling the glide door, operate the power slide door main switch and check that an auto operation is not performed.


Hide 85620 2.REMOVE AUTOMATIC DOOR REGULATOR MOTOR ASSEMBLY

a.
B554648

Remove the bolt and disconnect the automatic door regulator motor assembly from the glide door arm assembly.


b.
B554700C01
0,0 0,0 false
V113147

Remove in this Direction


Disconnect the 2 connectors and detach the clamp.


c.

Remove the grommet and pull out the wire harness from the vehicle body.


d.
B554701

Loosen the 3 bolts as shown in the illustration.


e.
B554702

Remove the 3 bolts as shown in the illustration.


f.
B554703C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the automatic door regulator motor assembly in the direction indicated by the arrow shown in the illustration.

NOTICE:

Do not damage the vehicle body with the automatic door regulator motor assembly.



g.
B554704

Remove the 3 bolts.