Home › Vehicle Interior › ENGINE HOOD / DOOR › AUTO CENTER DOOR UNIT (for Glide Type) › from 2019.08
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0400791 AUTO CENTER DOOR UNIT(for Glide Type) A

ENGINE HOOD / DOOR  AUTO CENTER DOOR UNIT(for Glide Type)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure below are for RHD vehicles.



PROCEDURE

Hide 85620 1.INSTALL AUTOMATIC DOOR REGULATOR MOTOR ASSEMBLY

a.
B554704

Temporarily install the 3 bolts.


b.
B554705C01
0,0 0,0 false
V113147

Install in this Direction


Set the automatic door regulator motor assembly in the direction indicated by the arrow shown in the illustration.

NOTICE:

Do not damage the vehicle body with the automatic door regulator motor assembly.



c.
B554702

Install the 3 bolts as shown in the illustration.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


d.
B554701

Tighten the 3 bolts and install the automatic door regulator motor assembly.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


e.
B556117C01
0,0 0,0 false
V113147

Install in this Direction


Insert the wire harness to the service hole of the vihicle body.


f.

Attach the clamp and connect the 2 connectors.


g.
B554648

Install the automatic door regulator motor assembly to the glide door arm assembly with the bolt.

Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)